If your Samsung washer is displaying the 4C error code, it is likely due to a power supply issue. This error code indicates that the washer is not receiving the correct voltage from the power supply. To fix this issue, you will need to check the power supply and make sure it is providing the correct voltage. You should also check the power cord and make sure it is securely connected to the wall outlet. If the power supply and power cord are both functioning correctly, then you may need to replace the power supply. Once you have checked the power supply, you can reset the washer and it should be back to normal.
How To Fix 4C On Samsung Washer
This error code indicates a problem with the door lock. To fix it, you will need to check the wiring connections and the door lock assembly. If the wiring connections are okay, then you may need to replace the door lock assembly.
How To Fix 4C On Samsung Washer
1. Check the water supply: Make sure the water supply is connected and turned on.
2. Check the drain hose: Make sure the drain hose is securely connected to the drain pipe and has no kinks.
3. Check the water pressure: Make sure the water pressure is adequate and not too low.
4. Check the water inlet valve: Make sure the water inlet valve is not clogged or blocked.
5. Check the filter: Make sure the filter is clean and not clogged.
6. Reset the washer: Unplug the washer from the power outlet and wait for at least five minutes before plugging it back in.
7. Check the water temperature: Make sure the water temperature is set correctly and not too hot.
8. Run a diagnostic test: Run a diagnostic test to identify the source of the problem.
The best way to fix the 4C error code on a Samsung washer is to unplug the washer and wait for at least 30 minutes before plugging it back in. This will reset the washer and should clear the error code. If the error persists, it is recommended to contact a professional appliance repair technician for further assistance.