If you are experiencing a 4C error code on your Samsung washing machine, you are likely dealing with a draining issue. This error code is often caused by a blockage in the drain hose or pump, or a faulty drain pump. Fortunately, this issue is relatively easy to fix. In this guide, we will walk you through the steps to troubleshoot and fix the 4C error code on your Samsung washing machine.
How To Fix 4C Error In Samsung Washing Machine
1. Unplug the washing machine from the power source.
2. Check the drain hose and make sure it is not clogged or kinked.
3. Check the water supply hoses and make sure there are no kinks or blockages.
4. Check the filter at the bottom of the machine for any blockages or debris.
5. Clean the filter and make sure it is free of any blockages.
6. Check the drain pump for any debris or blockages.
7. If the pump is blocked, clean it out.
8. Check the water level switch and make sure it is functioning properly.
9. If the water level switch is not functioning properly, replace it.
10. Reconnect the power source and run a test cycle to make sure the error code has been resolved.
The 4C error code in Samsung washing machines is typically caused by a faulty water level sensor or a blocked drain hose. To fix this error, first check the drain hose for any blockages and remove any debris that may be present. If the hose is clear, then the water level sensor may need to be replaced. If the error persists, contact a qualified technician for further assistance.