If your Wolf washer is not draining properly, you may need to drain it manually. This guide will walk you through the steps for draining a Wolf washer.
First, unplug the washer from the power outlet. Then, locate the drain hose at the back of the washer. It should be near the bottom of the washer.
Next, you will need to disconnect the drain hose from the washer. To do this, you will need to loosen the hose clamp that is holding the hose in place. Once the hose is disconnected, you can place the other end of the hose in a bucket or sink.
Now, you can turn the water supply valve to the off position. This will stop the water from entering the washer.
Finally, you can turn the washer to the spin cycle. This will cause the remaining water in the washer to be drained out of the hose and into the bucket or sink.
How To Drain Wolf Washer
To drain a Wolf washer, first unplug the washer and turn off the water supply. Next, locate the drain hose, which is usually found at the back of the washer. Disconnect the drain hose from the back of the washer and place it in a bucket or sink. Turn the washer back on, but do not select any cycles. Allow the washer to fill and then drain. Once the water has drained, turn off the washer and disconnect the drain hose from the bucket or sink. Finally, plug the washer back in and turn on the water supply.
How To Drain Wolf Washer
1. Unplug the washer from the wall outlet.
2. Turn off the water supply valves located on the wall behind the washer.
3. Place a bucket or pan under the drain hose located at the bottom of the washer.
4. Disconnect the drain hose from the back of the washer.
5. Allow the water to drain into the bucket or pan.
6. When the water has stopped draining, reconnect the drain hose to the back of the washer.
7. Turn the water supply valves back on.
8. Plug the washer back into the wall outlet.
In conclusion, draining a Wolf washer is a relatively simple process. All you need to do is disconnect the water supply hoses, locate the drain hose, and then place the drain hose into a bucket or sink. Once the drain hose is in place, turn the washer to the drain cycle and allow the water to drain out. Finally, turn off the washer and disconnect the drain hose. With these steps, you should have no problem draining your Wolf washer.