Draining a Whirlpool washer is a simple process that can be done in a few steps. The first step is to unplug the washer from the wall. This is an important safety measure as it will prevent any electrical shocks while you are draining the washer. Once the washer is unplugged, locate the drain hose. This is usually located at the back of the washer and is connected to a drain pipe. Disconnect the drain hose from the drain pipe and place the end of the hose into a bucket or sink. Turn the washer on the spin cycle and allow the water to drain out. Once the water has finished draining, turn off the washer and reconnect the drain hose to the drain pipe. Finally, plug the washer back into the wall and you are done.
How To Drain Whirlpool Washer
1. Unplug the washer from the wall.
2. Locate the drain hose at the back of the washer.
3. Disconnect the drain hose from the washer.
4. Place the end of the drain hose in a sink or bucket.
5. Turn the water supply valves to the off position.
6. Turn the washer on the spin cycle.
7. Allow the water to drain from the washer.
8. Once the water has drained, turn the washer off.
9. Reconnect the drain hose to the washer.
10. Turn the water supply valves back to the on position.
11. Plug the washer back into the wall.
The best way to drain a whirlpool washer is to disconnect the hoses from the back of the washer and place a bucket or drain pan underneath. Then, turn off the water supply and open the drain valve to allow the water to flow out. Once the water has drained, close the valve and reconnect the hoses. Finally, turn the water supply back on and the washer should be ready to use. With a few simple steps, you can easily drain a whirlpool washer.