Draining a Whirlpool dishwasher is a relatively simple task that can be done in just a few steps. First, unplug the dishwasher from the power source. Next, locate the drain hose, which is usually located near the bottom of the dishwasher. Disconnect the drain hose from the dishwasher and place the end of the hose in a bucket or sink. Turn on the hot water tap and allow it to run until the water coming out of the hose is clear. Once the water is clear, turn off the hot water tap and reconnect the drain hose to the dishwasher. Finally, plug the dishwasher back into the power source and you are done.
How To Drain Whirlpool Dishwasher
1. Unplug the dishwasher from the wall outlet.
2. Turn off the water supply valve to the dishwasher.
3. Place a bucket or pan underneath the dishwasher to catch any water that may come out.
4. Locate the drain hose connected to the back of the dishwasher and disconnect it from the drain pipe.
5. Place the drain hose in the bucket or pan.
6. Locate the drain plug at the bottom of the dishwasher and remove it.
7. Allow the water to drain from the dishwasher into the bucket or pan.
8. Once the water has finished draining, replace the drain plug and reconnect the drain hose.
9. Turn on the water supply valve to the dishwasher.
10. Plug the dishwasher back into the wall outlet.
In conclusion, draining a Whirlpool dishwasher is a relatively simple process. First, you should unplug the dishwasher from the power source. Then, you should locate the drain hose and disconnect it from the dishwasher. Finally, you should place the drain hose into a sink or bucket and turn the dishwasher on to drain the water. Once the dishwasher has finished draining, you can then reconnect the drain hose and plug the dishwasher back in. Following these steps will ensure that your Whirlpool dishwasher is properly drained.