If you have a Samsung top-loading washing machine, you may occasionally need to drain the water from the machine. This is a relatively simple process that can be done in a few steps. First, unplug the washing machine from the wall outlet. Then, locate the drain hose on the back of the machine. This is usually a white or gray hose that is connected to the back of the machine. Disconnect the hose from the machine and place it in a bucket or sink. Finally, turn the water off at the valve and turn the washing machine to the drain cycle. The water should begin to drain from the machine. Once the water has finished draining, turn the washing machine off and reconnect the drain hose. Your Samsung top-loading washing machine is now ready to use.
How To Drain Water From Samsung Washing Machine Top Load?
1. Unplug the washing machine from the power source.
2. Locate the drain hose at the back of the washing machine.
3. Place a bucket or bowl underneath the drain hose.
4. Unscrew the clamp that is holding the drain hose in place.
5. Pull the drain hose out of the washing machine and place it into the bucket or bowl.
6. Turn on the water supply and let the water drain out into the bucket or bowl.
7. When the water has finished draining, turn off the water supply and replace the drain hose back into the washing machine.
8. Secure the clamp to hold the drain hose in place.
9. Plug the washing machine back into the power source and you are done.
How To Drain Water From Samsung Washing Machine Top Load?
The best way to drain water from a Samsung top-load washing machine is to unplug the machine, disconnect the water supply, and then use a wet/dry vacuum to remove the water. You should also make sure to check the drain hose for any blockages. If the water is not draining properly, you may need to use a plunger or snake to clear the blockage. After the water is drained, you can then plug the machine back in and reconnect the water supply.