Draining an LG front-load washer is a relatively simple process that can be completed in a few easy steps. Before you begin, it is important to make sure that the power to the washer is turned off. Once this is done, you will need to locate the drain hose. This is usually located at the back of the washer, near the bottom. Once you have located the drain hose, you will need to attach a garden hose to it. Make sure the hose is securely attached and then direct the other end of the hose to an appropriate drainage area. Once this is done, you can turn the washer on and select the drain cycle. This will cause the water to be pumped out of the washer and into the garden hose. Once the cycle is complete, you can turn off the washer and disconnect the garden hose. Your LG front-load washer is now drained and ready for use.
How To Drain Lg Front Load Washer
1. Unplug the washer from the wall outlet.
2. Turn off the water supply valves to the washer.
3. Place a bucket or pan beneath the drain hose.
4. Disconnect the drain hose from the back of the washer.
5. Allow the water to drain into the bucket or pan.
6. When the water has finished draining, reconnect the drain hose and turn on the water supply valves.
7. Plug the washer back into the wall outlet.
In conclusion, draining a LG front load washer is a relatively simple process. First, unplug the washer from the wall outlet. Then, locate the drain hose and disconnect it from the washer. Place the hose into a bucket or sink, and then turn the washer on the spin cycle. Once the water has been drained, reconnect the drain hose and plug the washer back in. Finally, run a rinse cycle to ensure that all of the water has been drained. Following these steps should help you successfully drain your LG front load washer.