Draining a Kenmore washer is a simple process that can be done in a few easy steps. First, unplug the washer from the wall outlet. Next, locate the drain hose at the back of the washer. It will be connected to the back of the washer with a clamp. Loosen the clamp and remove the drain hose. Place the end of the drain hose into a bucket or sink. Finally, turn the washer on to the spin cycle. This will cause the water to drain out of the washer. Once the water has finished draining, turn the washer off and reattach the drain hose.
How To Drain Kenmore Washer
To drain a Kenmore washer, start by unplugging the power cord from the wall outlet. Then, locate the drain hose on the back of the washer and disconnect it from the drain pipe. Place the end of the hose into a bucket or sink. Next, turn the washer to the spin cycle and press the start button. This will spin the washer and pump out the water. Once the water has been drained, turn off the washer and reconnect the drain hose to the drain pipe. Finally, plug the power cord back into the wall outlet.
How To Drain Kenmore Washer
1. Unplug the washer from the power outlet.
2. Turn off the water supply valves to the washer.
3. Disconnect the water supply hoses from the washer.
4. Place a bucket beneath the washer to catch any remaining water.
5. Place a towel beneath the washer to catch any remaining water.
6. Pull the washer away from the wall and tilt it forward.
7. Use a flathead screwdriver to remove the drain hose from the back of the washer.
8. Allow the remaining water to drain into the bucket.
9. Replace the drain hose and secure it with the screwdriver.
10. Tilt the washer back and push it against the wall.
11. Reconnect the water supply hoses to the washer.
12. Turn on the water supply valves to the washer.
13. Plug the washer back into the power outlet.
In conclusion, draining a Kenmore washer is a relatively simple process. All you need to do is locate the drain hose, disconnect it from the back of the washer, and then attach the other end to a sink or other suitable drain. Once the hose is connected, turn on the faucet and allow the water to drain from the washer. Once the water has finished draining, turn off the faucet and disconnect the hose from the sink. Finally, reconnect the drain hose to the back of the washer and you’re done.