If your Electrolux washing machine needs draining, it is important to follow the correct steps to ensure that it is done safely. This guide will provide you with the steps to drain an Electrolux washing machine. Before you begin, make sure that you have turned off the power to the machine and that you have unplugged the power cord. You will need a bucket to collect the water that will be drained.
1. Locate the drain hose. This is usually located at the back of the machine.
2. Place the bucket underneath the drain hose.
3. Unscrew the drain hose from the washing machine.
4. Allow the water to drain into the bucket.
5. Once all of the water has been drained, reattach the drain hose to the washing machine.
6. Turn the power back on and plug the power cord back in.
How To Drain Electrolux Washing Machine
Draining an Electrolux washing machine is a simple process that can be done in a few minutes. First, unplug the machine from the wall outlet and shut off the water supply. Next, remove the drain hose from the back of the machine and place it in a bucket or sink. Then, turn the dial to the drain cycle and press the start button. Allow the machine to run until all of the water has been drained. Finally, turn off the machine and disconnect the drain hose before plugging the machine back in.
How To Drain Electrolux Washing Machine
1. Unplug the washing machine from the power source.
2. Turn off the water supply valves located at the back of the washing machine.
3. Place a bucket or bowl underneath the drain hose.
4. Disconnect the drain hose from the back of the washing machine and place the end of the hose into the bucket or bowl.
5. Turn the dial to the spin cycle and press the start button.
6. Allow the water to drain completely from the machine.
7. Once the water has drained, turn off the machine and disconnect the drain hose from the bucket or bowl.
8. Reconnect the drain hose to the back of the washing machine.
9. Turn on the water supply valves located at the back of the washing machine.
10. Plug the washing machine back into the power source.
In conclusion, draining an Electrolux washing machine is a relatively easy process. All you need to do is locate the drain hose, disconnect it from the back of the machine, and place it in a bucket or sink. Once the hose is in place, you can turn the water supply off and switch the machine to the drain cycle. After the cycle is complete, the water should be completely drained from the machine.