If you need to drain an Electrolux washer, it’s a relatively simple process. First, make sure the washer is unplugged from the wall outlet. Then, locate the drain hose at the back of the washer. The hose should be connected to a drain pipe or standpipe. If the hose is not connected to a drain pipe, you can use a bucket to catch the water. Once the hose is ready, turn off the water supply to the washer. Then, locate the drain pump filter at the front of the washer and open it. Remove any debris or objects that may be blocking the filter. Finally, turn the knob on the drain hose counterclockwise to open it and allow the water to drain out. Once the washer is empty, turn the knob clockwise to close the drain hose and turn the water supply back on.
How To Drain Electrolux Washer
Draining an Electrolux washer is a relatively simple process that requires only a few steps. First, unplug the washer from the wall outlet and turn off the water supply. Next, remove the drain hose from the back of the washer and place it in a bucket or sink. Place a towel under the washer to catch any water that may leak out. Finally, turn the knob on the back of the washer to the drain setting and allow the washer to drain completely. Once the washer is empty, turn the knob back to the off position and replace the drain hose. Finally, plug the washer back in and turn on the water supply.
How To Drain Electrolux Washer
1. Turn off the water supply to the washer.
2. Unplug the washer from the wall outlet.
3. Place a bucket or large pan beneath the drain hose.
4. Disconnect the drain hose from the back of the washer.
5. Allow the water to drain into the bucket or pan.
6. When the water has finished draining, reconnect the drain hose to the back of the washer.
7. Plug the washer back into the wall outlet.
8. Turn the water supply back on.
The Electrolux washer is a great appliance for washing clothes, but it is important to remember to drain it properly. To do this, unplug the washer from the wall outlet and turn off the water supply. Disconnect the water supply hose from the washer and place the hose in a bucket or sink. Turn the water valve to the off position and press the drain button on the washer. Allow the water to drain completely and then reconnect the water supply hose. Finally, plug the washer back into the wall outlet and you’re done! Following these steps will ensure that your Electrolux washer is properly drained and ready to use.