Draining a Whirlpool Duet Washer is a relatively simple task that can be done in a few steps. Before beginning, make sure that the washer is unplugged and the water supply is turned off. Once these steps are complete, you’ll be ready to begin draining the washer. First, locate the drain hose at the back of the washer. This hose is usually connected to a drain pipe or a standpipe. If the hose is connected to a drain pipe, you will need to disconnect it. Once the hose is disconnected, place the other end of the hose into a bucket or other suitable container. Next, locate the drain filter at the bottom of the washer. This filter is usually located near the front of the washer. Unscrew the filter and remove it. Once the filter is removed, the water should begin to drain out of the washer.
Recommended: How To Fix F5 E3 Error Code Whirlpool Washer
How To Drain A Whirlpool Duet Washer
1. Unplug the washer from the wall outlet.
2. Turn off the water supply to the washer.
3. Place a bucket or other container beneath the drain hose.
4. Disconnect the drain hose from the back of the washer.
5. Allow the water to drain into the bucket.
6. When the water has stopped draining, reconnect the drain hose.
7. Turn on the water supply to the washer.
8. Plug the washer back into the wall outlet.
Favorite: How To Access Drain Pump On Whirlpool Duet Washer
How To Drain A Whirlpool Duet Washer
Draining a Whirlpool Duet washer is a relatively easy task. First, unplug the washer from the wall outlet and turn off the water supply. Then, remove the drain hose from the back of the washer and place it in a bucket or sink. Finally, turn the knob on the front of the washer to the drain setting and press the start button. The water should begin to drain out of the washer. Once the water has completely drained, turn the knob back to the off position and replace the drain hose. Your Whirlpool Duet washer is now drained and ready to be used again.