If you need to drain your Maytag washer, it is a relatively simple process. First, make sure the washer is unplugged from the wall. Then, locate the drain hose that is connected to the back of the washer. This hose should be connected to a drain pipe that is connected to the wall or floor. Disconnect the hose from the drain pipe and place the end of the hose into a bucket or sink. You may need to use pliers to loosen the hose clamp. Next, turn the washer on its side and locate the drain plug. This is usually located near the bottom of the washer. Use a wrench to loosen the plug and allow the water to drain out. Once the water is drained, replace the plug and turn the washer back upright. Finally, reconnect the drain hose to the drain pipe and plug the washer back into the wall.
How To Drain A Maytag Washer
1. Unplug the washer from the wall outlet.
2. Turn off the water supply to the washer.
3. Place a large container or bucket beneath the drain hose.
4. Disconnect the drain hose from the back of the washer.
5. Allow the water to drain into the container.
6. Once the water has drained, reconnect the drain hose and turn the water supply back on.
7. Plug the washer back into the wall outlet.
Draining a Maytag washer is a simple process that can be done with a few basic tools. By disconnecting the water supply lines, removing the drain hose, and using a wet/dry vacuum to remove any remaining water, you can easily drain a Maytag washer. With a few simple steps, you can keep your Maytag washer running efficiently and safely.