Disassembling an LG dehumidifier is a straightforward process that requires only a few tools. Before beginning, make sure to unplug the dehumidifier from the wall outlet and wear protective gloves to avoid any cuts or scrapes. To begin the disassembly process, first remove the screws located on the rear of the dehumidifier. Then, remove the top panel and the side panels. Next, remove the screws located on the bottom of the dehumidifier and then remove the bottom panel. Finally, remove the screws located on the front of the dehumidifier and then remove the front panel. With the panels removed, you will have access to all the internal components of the dehumidifier.
How To Disassemble Lg Dehumidifier
1. Unplug the dehumidifier from the wall outlet.
2. Remove the screws from the back panel of the dehumidifier.
3. Carefully remove the back panel and set aside.
4. Unscrew the screws holding the fan assembly in place.
5. Carefully remove the fan assembly and set aside.
6. Unscrew the screws holding the compressor in place.
7. Carefully remove the compressor and set aside.
8. Unscrew the screws holding the evaporator coils in place.
9. Carefully remove the evaporator coils and set aside.
10. Unscrew the screws holding the control panel in place.
11. Carefully remove the control panel and set aside.
12. Unscrew the screws holding the water tank in place.
13. Carefully remove the water tank and set aside.
How To Disassemble Lg Dehumidifier
Disassembling an LG dehumidifier is relatively easy. First, unplug the unit from the wall outlet. Next, remove the front panel, screws, and grille. Then, disconnect the electrical wiring and remove the fan and motor. Finally, remove the water tank, drain hose, and other components. After all of these steps are completed, the dehumidifier should be completely disassembled. With a few simple tools and a bit of patience, you can easily take apart your LG dehumidifier.