Disassembling drawers in a Kenmore 596.7200302 refrigerator may be necessary for cleaning, maintenance, or repair purposes. While it may seem daunting at first, with the right tools and knowledge, the process can be relatively straightforward. In this guide, we will provide step-by-step instructions on how to safely disassemble the drawers in a Kenmore 596.7200302 refrigerator, allowing you to access and clean hard-to-reach areas and make any necessary repairs.
How To Disassemble Kenmore 596.7200302 Refrigerator Drawers
To disassemble the Kenmore 596.7200302 refrigerator drawers, start by removing all items from the drawers and unplugging the refrigerator. Next, pull the drawer out as far as it will go. Locate the release tabs on the sides of the drawer and press them in while lifting up on the front of the drawer. The drawer should then come completely out of the refrigerator.
Once the drawer is out, you can remove the glass shelves and any additional components, such as produce bins or dividers. To reassemble the drawers, simply reverse the process, making sure all components are securely in place before sliding the drawer back into the refrigerator.
It is important to handle the drawers carefully to avoid damage or injury. Refer to the user manual for specific instructions and illustrations on disassembling and reassembling the refrigerator drawers.
How To Disassemble Kenmore 596.7200302 Refrigerator Drawers
1. Remove all items from the refrigerator drawers and shelves.
2. Open the refrigerator door and locate the drawer you want to disassemble.
3. Pull the drawer out as far as it will go and then lift up on the front of the drawer to release it from the slides.
4. Once the front of the drawer is lifted, slide the drawer out completely from the slides.
5. To disassemble the drawer further, locate the clips or tabs on the sides of the drawer that hold the front and back pieces together.
6. Press down on the clips or tabs to release them and pull the front and back pieces apart.
7. To remove the glass or plastic cover from the front of the drawer, gently lift up on the edges to release it from the clips holding it in place.
8. Repeat the above steps for any additional drawers you want to disassemble.
9. To reassemble the drawers, simply reverse the steps above, making sure to snap the front and back pieces back together securely and slide the drawer back onto the slides until it is fully seated.
10. Once all drawers are reassembled, replace any items you removed from the refrigerator and close the refrigerator door.
In conclusion, disassembling Kenmore 596.7200302 refrigerator drawers is a relatively simple process that can be done with the right tools and a bit of patience. By following the steps outlined in this guide, you can easily remove the drawers from your refrigerator for cleaning or repair purposes. Just remember to handle the drawers with care and to reassemble them properly once you have completed your task. With a little effort, you can keep your refrigerator in top working condition for years to come.