If you need to disassemble an LG dehumidifier, the process is relatively simple. First, make sure the dehumidifier is unplugged and the power is off. Then, remove the filter cover and take out the filter. Next, unscrew the screws on the back of the dehumidifier and remove the back panel. You can then remove the fan, motor, and other components. To reassemble the dehumidifier, simply reverse the steps. Be sure to check the manufacturer’s instructions for any specific instructions regarding your particular model.
How To Disamble Lg Dehumidifier
1. Unplug the dehumidifier from the power outlet.
2. Remove the water tank from the unit.
3. Remove the screws that hold the top and side panels in place.
4. Carefully lift off the top and side panels.
5. Disconnect any wires that are connected to the control board.
6. Remove the screws that hold the control board in place.
7. Carefully lift off the control board.
8. Remove the screws that hold the fan motor in place.
9. Carefully lift off the fan motor.
10. Remove the screws that hold the evaporator coils in place.
11. Carefully lift off the evaporator coils.
12. Remove the screws that hold the condenser coils in place.
13. Carefully lift off the condenser coils.
14. Remove the screws that hold the compressor in place
Disassembling an LG dehumidifier is a relatively straightforward process. First, unplug the dehumidifier and remove the filter. Next, remove the screws that hold the back panel in place. With the back panel removed, you can access the fan and motor. Remove the screws that hold the fan and motor in place and then carefully lift them out. Finally, remove the remaining screws and lift the remaining components out. With these steps, you should be able to successfully disassemble your LG dehumidifier.