If you have a Whirlpool dryer and are looking for a way to disable the buzzer, then you have come to the right place. Disabling the buzzer on a Whirlpool dryer is a relatively simple process that can be done in just a few steps. In this guide, we will walk you through the steps needed to disable the buzzer on your Whirlpool dryer. By the end of this guide, you should have a better understanding of how to disable the buzzer on your Whirlpool dryer. Let’s get started!
How To Disable Buzzer On Whirlpool Dryer
To disable the buzzer on a Whirlpool dryer, first locate the buzzer switch on the back of the dryer. Then, press and hold the switch for three seconds. The buzzer will be disabled and will no longer sound when the dryer is finished. To re-enable the buzzer, press and hold the switch for three seconds again. This will reset the buzzer and it will sound when the dryer is finished.
How To Disable Buzzer On Whirlpool Dryer
1. Unplug the dryer from the wall outlet.
2. Locate the buzzer on the control panel.
3. Use a small screwdriver to remove the screws that secure the control panel to the dryer.
4. Carefully pull the control panel away from the dryer and locate the buzzer.
5. Disconnect the wires that are connected to the buzzer.
6. Remove the buzzer from the control panel and discard it.
7. Reattach the control panel to the dryer and secure it with the screws.
8. Plug the dryer back into the wall outlet.
In conclusion, disabling the buzzer on a Whirlpool dryer is a relatively simple process. All you need to do is locate the buzzer switch on the control panel, turn it off, and then press the start button to confirm the change. With the buzzer disabled, you can now enjoy a peaceful drying cycle without any annoying sounds.