If you have a Hotpoint dryer and you are tired of the loud buzzer that sounds when the cycle is complete, you can easily disable it. This guide will walk you through the steps of how to disable the buzzer on your Hotpoint dryer.
First, locate the control panel on your Hotpoint dryer. This is usually located on the top or front of the dryer. Once you have located the control panel, look for the button labeled “Buzzer” or “Alarm”. This button will be located near the other control buttons. Press and hold the “Buzzer” or “Alarm” button for 3-5 seconds. This will disable the buzzer on your Hotpoint dryer. To re-enable the buzzer, press and hold the same button for 3-5 seconds.
How To Disable Buzzer On Hotpoint Dryer
Hotpoint dryers are equipped with a buzzer that will sound when the dryer cycle is complete. If this sound is annoying, it can be disabled. To do so, open the dryer door and locate the control panel. On the control panel, find the buzzer button and press it to turn the sound off. If the button is not labeled, look for a button with a bell icon. Once the button is pressed, the buzzer will no longer sound when the cycle is complete.
How To Disable Buzzer On Hotpoint Dryer
1. Unplug the dryer from the wall outlet.
2. Locate the buzzer on the back panel of the dryer.
3. Use a flathead screwdriver to remove the screws that secure the buzzer to the back panel.
4. Disconnect the wires from the buzzer.
5. Carefully remove the buzzer from the dryer.
6. Place a piece of electrical tape over the buzzer terminals.
7. Reattach the back panel to the dryer and secure with the screws.
8. Plug the dryer back into the wall outlet.
The buzzer should now be disabled.
In conclusion, disabling the buzzer on a Hotpoint dryer is a simple process. All you need to do is locate the buzzer switch on the back of the dryer, and turn it off. This will stop the buzzer from sounding when the dryer cycle is complete. If you are unable to locate the switch, refer to the user manual for detailed instructions.