How To Clear L2 On Lg Dishwasher – Solution

If your LG dishwasher is not draining properly, you may need to clear the L2 drain line. This is a simple process that can be done in a few steps. First, turn off the power to the dishwasher. Next, locate the drain line and remove the drain hose from the dishwasher. You may need to use a pair of pliers to loosen the clamp. Once the hose is removed, use a wet/dry vacuum to remove any debris from the line. Finally, reattach the hose and turn the power back on. Your dishwasher should now be draining properly.


Suggested: How To Start Lg Inverter Direct Drive Dishwasher


How To Clear L2 On Lg Dishwasher

To clear the L2 error code on your LG dishwasher, you will need to reset the dishwasher. To do this, press and hold the Start/Reset button for 3 seconds. This should reset the dishwasher and clear the error code.


Recommended: What Does Cl Mean On Lg Dishwasher


How To Clear L2 On Lg Dishwasher

1. Unplug the dishwasher from the power source.
2. Remove the lower dish rack and the silverware basket.
3. Locate the drain hose at the bottom of the dishwasher.
4. Use a wet/dry vacuum to suck out any standing water in the hose.
5. Use a stiff brush to clean the drain hose and the drain filter.
6. Replace the drain filter and the silverware basket.
7. Plug the dishwasher back into the power source.
8. Run a cycle on the dishwasher to check for proper operation.


Popular: What Does L2 Mean On Lg Dishwasher


In conclusion, clearing l2 on an LG dishwasher is a relatively simple process. First, make sure the dishwasher is turned off and unplugged. Then, remove the lower dishrack and locate the l2 switch. Use a flathead screwdriver to move the switch up and down until it clicks. Finally, replace the lower dishrack and plug the dishwasher back in. With these simple steps, you should be able to successfully clear l2 on your LG dishwasher.