Welcome to the guide on how to clean a Whirlpool washing machine front load. Cleaning your washing machine is an important part of keeping your clothes clean and fresh. In this guide, we will provide you with step-by-step instructions on how to properly clean your Whirlpool washing machine front load. We will also provide some tips on how to maintain your washing machine in the future. So, let’s get started!
How To Clean Whirlpool Washing Machine Front Load
1. Unplug the washing machine and turn off the water supply.
2. Remove any clothing or items from the drum and wipe down the inside of the drum with a damp cloth.
3. Clean the detergent drawer, rubber seal and door seal with a damp cloth.
4. Pour 1/2 cup of baking soda into the drum and run a hot cycle.
5. Once the cycle is complete, wipe down the drum and detergent drawer with a damp cloth.
6. Pour 1 cup of white vinegar into the drum and run a hot cycle.
7. Once the cycle is complete, wipe down the drum and detergent drawer with a damp cloth.
8. Plug the washing machine back in and turn on the water supply.
To clean a Whirlpool washing machine front load, you should use a mild detergent and warm water to clean the exterior of the machine. Use a soft cloth or sponge to wipe down the exterior of the machine, and then use a damp cloth to wipe down the interior of the machine. If there is any build-up of lint or dirt, use a soft brush to remove it. Finally, use a mild detergent and warm water to clean the inside of the machine. Make sure to rinse the machine thoroughly after cleaning and leave the door open to allow the machine to dry. Following these steps will ensure that your Whirlpool washing machine front load is kept clean and in good working order.