How To Clea Inlet Screen On Haier Washing Machine

Cleaning the inlet screen on a Haier washing machine is an important part of regular maintenance. The inlet screen is designed to prevent debris from entering the machine and clogging the internal components. By cleaning the inlet screen regularly, you can help ensure that your washing machine runs efficiently and effectively. Here is how to clean the inlet screen on a Haier washing machine:

1. Unplug the washing machine from the wall outlet.

2. Locate the inlet screen, which is usually located on the back of the machine near the water inlet valves.

3. Remove the inlet screen by unscrewing the screws that hold it in place.

4. Clean the inlet screen with a soft brush and warm, soapy water.

5. Rinse the inlet screen thoroughly and allow it to air dry.

How To Clea Inlet Screen On Haier Washing Machine

The inlet screen on a Haier washing machine should be cleaned regularly to keep it free of debris and lint. To clean the screen, first turn off the water supply and unplug the washing machine. Then, remove the hoses from the back of the machine and locate the inlet screen. Use a pair of needle-nose pliers to remove the screen and rinse it with warm water and a soft brush. Once the screen is clean, reattach it to the machine and reconnect the hoses. Finally, turn the water supply back on and plug the machine back in. Regularly cleaning the inlet screen will help keep your Haier washing machine running smoothly.

How To Clea Inlet Screen On Haier Washing Machine

1. Unplug the washing machine from the power outlet.
2. Locate the inlet screen on the back of the washing machine.
3. Remove the inlet screen by unscrewing the screws or clips that hold it in place.
4. Clean the inlet screen with a soft brush or cloth.
5. Rinse the inlet screen in warm water to remove any dirt or debris.
6. Allow the inlet screen to dry completely before reinstalling it.
7. Reinstall the inlet screen and secure it with the screws or clips.
8. Plug the washing machine back into the power outlet.

In conclusion, cleaning the inlet screen on a Haier washing machine is a simple task that can be done in a few steps. First, disconnect the power and water supply to the machine. Then, open the inlet valve and remove the filter. Clean the filter using a soft brush or cloth and running water. Finally, reinstall the filter and close the inlet valve. Following these steps will ensure that your Haier washing machine is running properly and efficiently.