How To Change Wire Harness On Maytag Freezer Lid

Changing the wire harness on a Maytag freezer lid is a simple task that requires minimal tools and time. Before beginning, it is important to make sure that the power to the freezer is turned off. Once the power is off, you will need a Phillips head screwdriver and a pair of needle nose pliers.

Start by removing the screws that hold the lid to the freezer. Once the screws are removed, you will need to carefully lift the lid off of the freezer. You should now be able to see the wire harness. To remove the wire harness, use the needle nose pliers to carefully disconnect the wires from the terminals. Once the wires are disconnected, use the Phillips head screwdriver to remove the screws that hold the wire harness in place.

 

How To Change Wire Harness On Maytag Freezer Lid

1. Unplug the freezer from the power source.
2. Remove the screws from the freezer lid.
3. Lift the lid off the freezer and set aside.
4. Locate the wire harness that connects the lid to the freezer.
5. Disconnect the wire harness from the lid.
6. Connect the new wire harness to the lid.
7. Reconnect the wire harness to the freezer.
8. Replace the lid and secure it with the screws.
9. Plug the freezer back into the power source.

 

How To Change Wire Harness On Maytag Freezer Lid

In conclusion, changing the wire harness on a Maytag freezer lid is a relatively simple process that can be completed in a few steps. First, make sure to unplug the freezer and remove the lid. Next, locate the wire harness and disconnect the old harness from the lid. Finally, connect the new harness to the lid and replace the lid. With these steps, you should have successfully changed the wire harness on your Maytag freezer lid.