Changing the water inlet valve on an Amana washing machine is a relatively simple task that can be completed in a few steps. Before beginning, make sure to turn off the water supply to the washing machine and unplug the power cord from the wall outlet. You will need a flathead screwdriver, a pair of pliers, and a new water inlet valve.
First, locate the water inlet valve on the back of the washing machine. It will be connected to the water supply lines and the water hoses. Using a flathead screwdriver, remove the screws that are holding the water inlet valve in place. Carefully remove the water inlet valve and disconnect the water supply lines and water hoses. Next, take the new water inlet valve and connect the water supply lines and water hoses to the new valve. Make sure to tighten the connections securely with a pair of pliers.
How To Change Water Inlet Valve On Amana Washing Machine
Changing the water inlet valve on an Amana washing machine is a relatively simple process. First, the power to the machine must be shut off. Then, the water hoses connected to the water inlet valve must be disconnected. The screws that secure the valve to the machine must then be removed. The old valve can then be removed and replaced with the new valve. Finally, the water hoses must be reconnected and the power to the machine turned back on. Following these steps will ensure that the water inlet valve on an Amana washing machine is properly changed.
How To Change Water Inlet Valve On Amana Washing Machine
1. Unplug the washing machine from the power source.
2. Shut off the water supply to the washing machine.
3. Disconnect the water hoses from the inlet valve.
4. Remove the screws that hold the inlet valve in place.
5. Remove the inlet valve from the washing machine.
6. Install the new inlet valve in the same position as the old one.
7. Secure the inlet valve with the screws.
8. Reconnect the water hoses to the inlet valve.
9. Turn on the water supply to the washing machine.
10. Plug the washing machine back into the power source.
Changing the water inlet valve on an Amana washing machine is a relatively simple task that can be completed in just a few steps. First, unplug the washing machine and shut off the water supply. Next, remove the screws that hold the valve in place and disconnect the hoses. Finally, install the new valve and reattach the hoses. Once the new valve is secure, turn the water supply back on and plug the washing machine back in. With these steps, you can easily replace the water inlet valve on your Amana washing machine.