Changing the water filter in your Maytag refrigerator is an important part of maintaining the quality of your water and ice. This guide will walk you through the steps of replacing the water filter in your Maytag refrigerator. Before you begin, make sure you have the correct replacement filter for your refrigerator.
How To Change Water Filter In Maytag Refrigerator
1. Locate the water filter. In most Maytag refrigerators, the filter is located in the upper right-hand corner of the refrigerator compartment.
2. Turn off the water supply. This can usually be done by turning the valve located behind the refrigerator.
3. Remove the old filter. This can usually be done by twisting the filter counterclockwise until it comes loose.
4. Install the new filter. Insert the new filter into the filter housing and twist it clockwise until it is secure.
5. Turn on the water supply. This can usually be done by turning the valve located behind the refrigerator.
6. Flush the filter. This can usually be done by running the water for 5-10 minutes until the water runs clear.
7. Reset the filter indicator. This can usually be done by pressing and holding the reset button for 3 seconds.
Changing the water filter in a Maytag refrigerator is a simple process that can be completed in a few easy steps. First, locate the filter in the refrigerator, usually in the top right corner or in the back wall. Then, twist the filter to the left and pull it out. Replace the filter with a new one, making sure that the arrow on the filter is pointing in the direction of the water flow. Finally, twist the filter to the right to secure it in place. With these steps, you can easily change the water filter in your Maytag refrigerator and ensure that you and your family have access to clean, filtered water.