Changing the heating element in a Samsung dryer is a straightforward process that requires only a few basic tools. Before beginning, make sure you have the correct replacement heating element for your model of Samsung dryer. You will also need a Phillips head screwdriver, a pair of needle nose pliers, and a socket wrench. First, unplug the dryer from the wall and remove the back panel. This will give you access to the heating element. Next, disconnect the wires from the heating element and remove the screws that hold the element in place. Once the screws are removed, the heating element can be pulled out. Install the new element and secure it with the screws. Finally, reconnect the wires and replace the back panel. Make sure to plug the dryer back in before testing it.
How To Change The Heating Element In A Samsung Dryer
1. Unplug the dryer from the power source.
2. Remove the back panel of the dryer.
3. Disconnect the wires from the heating element.
4. Remove the screws that secure the heating element to the dryer.
5. Remove the old heating element and replace it with the new one.
6. Secure the new heating element with the screws.
7. Reconnect the wires to the new heating element.
8. Replace the back panel of the dryer.
9. Plug the dryer back into the power source.
In conclusion, changing the heating element in a Samsung dryer is a relatively straightforward process. All that is needed is a screwdriver, a socket wrench, and a replacement heating element. First, the back panel of the dryer should be removed, followed by the front panel. The heating element should then be located and disconnected from the wires.
The old element should then be unscrewed and removed, and the new element should be installed in its place. Finally, the panels should be reattached and the dryer should be tested to ensure that the new element is working properly.