Changing the ice maker dispenser motor on a Maytag side by side refrigerator can be a daunting task. However, with the right tools and knowledge, it can be done without too much difficulty. This guide will provide step-by-step instructions on how to change the ice maker dispenser motor on a Maytag side by side refrigerator. Before beginning, make sure you have the correct tools and replacement parts on hand. You will need a Phillips head screwdriver, a flat head screwdriver, and a new ice maker dispenser motor. Additionally, you will need to disconnect the power to the refrigerator before beginning. Once you have all the necessary tools and parts, you are ready to begin.
How To Change Ice Maker Dispenser Motor On Maytag Side By Side Refrigerator
1. Unplug the refrigerator from the power source.
2. Locate the ice maker dispenser motor, which is located at the back of the refrigerator.
3. Remove the screws that secure the motor to the refrigerator.
4. Disconnect the wiring harness from the motor.
5. Remove the old motor and replace it with the new motor.
6. Reconnect the wiring harness to the new motor.
7. Secure the motor to the refrigerator with the screws.
8. Plug the refrigerator back into the power source.
9. Test the ice maker dispenser motor to make sure it is working properly.
In conclusion, changing the ice maker dispenser motor on a Maytag side by side refrigerator is a relatively simple job that can be done with a few basic tools. First, you will need to unplug the refrigerator and remove the ice maker assembly. Next, you will need to locate the motor and disconnect the power and water lines. Finally, you will need to remove the old motor and replace it with the new one. Once the new motor is in place, you can reattach the power and water lines and reassemble the ice maker assembly. With a little patience, you can have your Maytag side by side refrigerator working like new again.