How To Change Dryer Belt On Whirlpool Dryer

Changing the dryer belt on a Whirlpool dryer is a relatively simple task that can be completed in a few steps. Before beginning, make sure that you have the correct belt for your model of Whirlpool dryer. You will also need a Phillips head screwdriver, a putty knife, and a pair of needle-nose pliers. First, unplug the dryer from the wall. Then, remove the back panel of the dryer to access the belt. Using the putty knife, release the tension on the old belt and remove it. Next, take the new belt and thread it around the drum, motor pulley, and idler pulley. Finally, use the Phillips head screwdriver to secure the back panel and plug the dryer back in. With these steps, you should be able to successfully change the belt on your Whirlpool dryer.

1. Unplug the dryer from the wall.

2. Remove the lint filter and the back panel of the dryer.

3. Disconnect the wires connected to the motor and the thermal fuse.

4. Unscrew the tensioner pulley from the dryer and remove the old belt.

5. Insert the new belt around the drum, making sure it is properly aligned.

6. Reattach the tensioner pulley and the wires.

7. Replace the back panel and the lint filter.

8. Plug the dryer back into the wall and test to make sure the belt is working properly.

How To Change Dryer Belt On Whirlpool Dryer

Changing the dryer belt on a Whirlpool dryer is a relatively easy task that can be completed in a few steps. First, unplug the dryer and remove the front panel. Next, remove the drum and inspect the belt for any signs of wear and tear. If the belt is worn, replace it with a new one. Finally, reassemble the dryer and plug it back in. With the right tools and a bit of patience, anyone can replace the dryer belt on a Whirlpool dryer.