Changing the control unit on a Maytag microwave is a relatively simple task that can be done in a few steps. Before you begin, make sure you have all the necessary tools and parts. You will need a Phillips head screwdriver, a flathead screwdriver, and a new control unit.
First, unplug the microwave from the wall outlet and remove the screws on the back panel. Once the back panel is removed, locate the control unit. It is usually located on the top right side of the microwave.
How To Change Control Unit On Maytag Microwave
1. Unplug the microwave from the wall outlet.
2. Remove the outer cabinet of the microwave.
3. Access the control unit and disconnect the wires from it.
4. Remove the screws that secure the control unit in place.
5. Remove the old control unit and install the new one.
6. Reconnect the wires to the new control unit.
7. Secure the new control unit in place with the screws.
8. Reassemble the outer cabinet of the microwave.
9. Plug the microwave back into the wall outlet.
The process of changing a control unit on a Maytag microwave is relatively straightforward and can be done with minimal tools and knowledge. First, locate the control unit, which is typically located behind the control panel. Then, remove the screws securing the control unit to the panel and disconnect the wiring harness. Finally, install the new control unit and reconnect the wiring harness. With a few simple steps, you can easily replace the control unit on a Maytag microwave.