Changing the belt on a Whirlpool washer is a relatively simple task that can be completed in a few steps. Before beginning, make sure you have a new belt, as well as a Phillips head screwdriver. First, unplug the washer from the wall and turn off the water supply. Next, remove the screws from the back of the washer and remove the back panel. You will then be able to access the belt that needs to be replaced. Carefully slide the old belt off of the pulleys and replace it with the new one. Make sure the belt is properly aligned and tensioned. Finally, replace the back panel and screws, plug the washer back in, and turn the water supply back on. Your Whirlpool washer is now ready to use with a new belt.
How To Change Belt On Whirlpool Washer
1. Unplug the washer and shut off the water supply.
2. Remove the front panel of the washer.
3. Remove the old belt from the motor pulley and the drive pulley.
4. Place the new belt around the motor pulley and the drive pulley.
5. Make sure the belt is properly aligned and tensioned.
6. Reinstall the front panel of the washer.
7. Plug in the washer and turn on the water supply.
8. Test the washer to make sure the belt is working properly.
How To Change Belt On Whirlpool Washer
Changing the belt on a Whirlpool washer is a relatively simple process. All it takes is a few tools and a bit of patience. First, unplug the washer and remove the access panel. Then, remove the old belt and replace it with the new one. Finally, reassemble the washer and plug it back in. With these steps, you should be able to successfully change the belt on your Whirlpool washer.