Changing a Kenmore dryer belt is a relatively simple task that can be completed in just a few steps. First, you will need to unplug the dryer from the wall and move it away from the wall. Next, you will need to remove the back panel of the dryer to access the belt. Once the back panel is removed, you can remove the old belt and replace it with the new belt. Make sure to route the new belt around the pulleys and tensioner wheel in the same way the old belt was routed. Finally, replace the back panel and plug the dryer back in. With these steps, you should have a new belt installed in your Kenmore dryer in no time. If you need a Kenmore dryer belt, you can purchase one on Amazon here.
Popular: How To Reset Kenmore Dryer
How To Change A Kenmore Dryer Belt
To change the belt on a Kenmore dryer, start by unplugging the dryer and removing the back panel. Next, remove the drum and the old belt, and then slide the new belt onto the drum. After that, thread the belt around the motor pulley and the idler pulley. Finally, reassemble the dryer and plug it back in. This process should take about an hour and requires basic tools such as a screwdriver and pliers. If you need a Kenmore dryer belt, you can purchase one on Amazon here.
Suggested: How To Disable Buzzer On Kenmore Dryer
How To Change A Kenmore Dryer Belt
1. Unplug the dryer from the wall and move it away from the wall.
2. Remove the screws from the back panel of the dryer and remove the panel.
3. Disconnect the power cord and the exhaust vent hose from the back of the dryer.
4. Remove the drum from the dryer by removing the screws that hold it in place.
5. Remove the old belt from the pulley and the motor.
6. Install the new belt onto the pulley and the motor.
7. Reinstall the drum and replace the screws.
8. Reconnect the power cord and the exhaust vent hose.
9. Replace the back panel and secure it with the screws.
10. Plug the dryer back into the wall and test it to make sure the belt is working properly.
Changing a Kenmore dryer belt is a relatively simple task that can be completed in a few steps. First, unplug the dryer and remove the back panel. Then, remove the old belt and replace it with a new one. Finally, reassemble the dryer and plug it back in. With a few basic tools and a little bit of patience, anyone can easily change a Kenmore dryer belt. If you need a Kenmore dryer belt, you can purchase one on Amazon here.