Changing the heating element in a GE dryer is a relatively simple process that can be completed in a few steps. Before beginning the process, make sure to unplug the dryer from the wall outlet and wear protective gloves. Additionally, you will need a Phillips screwdriver and a new heating element. Once you have the necessary supplies, follow these steps to change the heating element in a GE dryer:
1. Remove the back panel of the dryer by loosening the screws with the Phillips screwdriver.
2. Locate the heating element and disconnect the wires connected to it.
3. Remove the mounting screws that secure the heating element to the dryer.
4. Remove the old heating element and replace it with the new one.
5. Secure the new heating element with the mounting screws.
6. Reconnect the wires to the new heating element.
7. Replace the back panel of the dryer and secure it with the screws
How To Change A Heating Element In A Ge Dryer
Changing a heating element in a GE dryer is a relatively simple task. To begin, unplug the dryer and remove the back panel. Next, locate the heating element and disconnect the wires from the terminals. Remove the mounting screws and lift the element out of the dryer. Install the new element in the same way, making sure the wires are connected to the correct terminals. Reinstall the back panel and plug the dryer back in. Test the dryer to make sure the heating element is working properly.
How To Change A Heating Element In A Ge Dryer
1. Unplug the dryer from the wall and turn off the power at the circuit breaker.
2. Remove the back panel of the dryer to access the heating element.
3. Disconnect the wires from the heating element and remove the old element.
4. Install the new heating element and reconnect the wires.
5. Replace the back panel and plug the dryer back into the wall.
6. Turn the power back on at the circuit breaker and test the dryer.
Changing a heating element in a GE dryer is an easy process that can be done in a few simple steps. First, you must unplug the dryer and remove the back panel. Then, you must locate the heating element and remove the wires connected to it. Next, you must remove the screws holding the element in place and take out the old element. Finally, you must install the new element and reconnect the wires. After that, you can replace the back panel and plug the dryer back in. With these steps, you can easily change the heating element in your GE dryer.