Changing a GE dryer belt is a relatively simple task that can be completed in less than an hour. The first step is to unplug the dryer from the wall outlet and move it away from the wall. Next, you will need to remove the screws from the back panel and lift off the panel to expose the drum and belt. Then, you will need to remove the tensioner and the belt from the dryer. After that, you can install the new belt by routing it around the drum and the tensioner. Finally, you can reattach the back panel and plug the dryer back in. With these steps, you can easily replace the belt on your GE dryer.
How To Change A Ge Dryer Belt
Changing a GE dryer belt requires the removal of the front panel of the dryer, the drum, and the drive motor. Once these components are removed, the old belt can be taken off and the new belt can be put in its place. Once the new belt is installed, the drive motor, drum, and front panel can be reattached. Once all the components are back in place, the dryer should be ready to use.
How To Change A Ge Dryer Belt
1. Unplug the dryer from the wall and move it away from the wall.
2. Remove the back panel of the dryer.
3. Disconnect the door switch wires and the drum light wires.
4. Remove the drum from the dryer.
5. Unscrew the tensioner pulley and remove the old belt.
6. Install the new belt around the drum and the motor pulley.
7. Reinstall the tensioner pulley and adjust the belt tension.
8. Reattach the drum light and door switch wires.
9. Reinstall the back panel.
10. Plug the dryer back in and test it.
Changing a GE dryer belt is a relatively simple process that can be completed in a short amount of time. All that is needed is a few basic tools, a new belt, and a bit of patience. Start by unplugging the dryer, then remove the front panel and drum. The old belt can then be removed and the new belt installed. Finally, reassemble the dryer and plug it back in. With a few simple steps, you can have your GE dryer running like new again.