Changing a dryer belt on a Maytag dryer is a relatively simple repair that can be completed in less than an hour. Before beginning the repair, make sure that the power to the dryer is disconnected. You will need a Phillips screwdriver and a new dryer belt. To begin, remove the screws from the back panel of the dryer and remove the panel. The drum will be visible. Carefully remove the old belt from the drum and the motor pulley. Install the new belt around the drum and the motor pulley. Make sure that the belt is snug and properly aligned. Replace the back panel and secure it with the screws. Test the dryer to ensure that the repair was successful.
How To Change A Dryer Belt Maytag
1. Unplug the dryer from the wall outlet.
2. Remove the back panel of the dryer.
3. Remove the drum belt from the motor and idler pulley.
4. Disconnect the wires from the motor and idler pulley.
5. Remove the idler pulley and motor from the dryer.
6. Install the new belt on the motor and idler pulley.
7. Reconnect the wires to the motor and idler pulley.
8. Reinstall the drum belt on the motor and idler pulley.
9. Reinstall the back panel of the dryer.
10. Plug the dryer back into the wall outlet.
Changing a dryer belt on a Maytag dryer is a relatively simple process that can be done with a few basic tools. First, you need to unplug the dryer and remove the back panel. Then, you will need to remove the drum and the old belt. After that, you can install the new belt, replace the drum, and reattach the back panel. Finally, you can plug the dryer back in and test it to make sure that the belt is working correctly. With a little patience and a few tools, you can easily change the dryer belt on a Maytag dryer.