Changing the belt on a Bosch dryer is a relatively simple process that can be completed in a few steps. Before beginning, make sure to disconnect the power to the dryer and wear protective gloves. You will need a Phillips head screwdriver, a flat head screwdriver, and a new dryer belt. Begin by removing the front panel of the dryer, which is held in place by two screws. Once the panel is removed, you will be able to access the drum and the belt. Carefully remove the old belt by pulling it off the drum. Next, loop the new belt around the drum and the motor pulley, and then pull the belt tight. Finally, replace the front panel and secure it with the screws. Your Bosch dryer is now ready to use with the new belt.
Popular: Where Is The Moisture Sensor On A Bosch Dryer
How To Change A Bosch Dryer Belt
Changing the belt on a Bosch dryer is a relatively simple process. First, unplug the dryer and remove the back panel. Then, remove the drum and the old belt. After, install the new belt and thread it around the drum and the idler pulley. Finally, reassemble the dryer and plug it back in. Make sure the belt is tight, but not too tight, and that the drum is spinning freely. With a few simple steps, you can have your Bosch dryer running like new again.
How To Change A Bosch Dryer Belt
1. Unplug the dryer from the wall outlet and move it away from the wall.
2. Remove the back panel of the dryer by unscrewing the screws that hold it in place.
3. Locate the tensioner pulley and the belt.
4. Loosen the tensioner pulley and remove the old belt.
5. Place the new belt on the drum and around the tensioner pulley.
6. Tighten the tensioner pulley and check that the belt is properly seated on the drum and pulley.
7. Replace the back panel and screws.
8. Plug the dryer back into the wall outlet and test the dryer.
Changing a Bosch dryer belt is a relatively simple task that can be completed in a few steps. First, unplug the dryer and remove the front panel and drum. Then, remove the old belt and replace it with a new one. Finally, replace the drum and front panel and plug the dryer back in. With the right tools and a bit of patience, anyone can easily change a Bosch dryer belt.