How To Change Water Filter Kenmore Refrigerator

Changing the water filter in your Kenmore refrigerator is an important part of keeping your refrigerator running efficiently. It is recommended that you change the water filter every 6 months or when the “change filter” light comes on. This guide will walk you through the steps on how to change the water filter in your Kenmore refrigerator.

Before you begin, make sure you have the correct replacement filter for your refrigerator. You can find the filter number printed on the side of the filter or in the refrigerator’s manual.

Once you have the correct filter, follow these steps to change the water filter:

1. Locate the filter. It is usually located in the upper right corner of the refrigerator compartment.

2. Twist the filter counterclockwise to remove it.

3. Take the new filter and insert it into the filter housing. Make sure it is firmly in place.

How To Change Water Filter Kenmore Refrigerator

Changing the water filter on a Kenmore refrigerator is a simple and straightforward process. First, locate the filter compartment, which is typically located in the upper right-hand corner of the fridge. Then, open the compartment and remove the old filter. Insert the new filter, making sure to align the arrows on the filter with the arrows on the compartment. Close the compartment and run water through the filter for five minutes to flush out any debris. Finally, reset the filter indicator light, if applicable. With the new filter in place, your Kenmore refrigerator is now ready to provide clean and fresh-tasting water.

How To Change Water Filter Kenmore Refrigerator

1. Locate the water filter. The water filter is usually located in the bottom right corner of the refrigerator, behind the grille.

2. Turn off the water supply. Turn off the water supply to the refrigerator by turning the shut-off valve clockwise.

3. Remove the old filter. Pull the old filter straight out of the filter housing.

4. Install the new filter. Insert the new filter into the filter housing and turn it clockwise until it is securely in place.

5. Turn on the water supply. Turn the shut-off valve counterclockwise to turn on the water supply to the refrigerator.

6. Flush the system. Run the water from the dispenser for 5 minutes to flush the system and remove any air from the lines.

7. Reset the filter indicator. Reset the filter indicator on the refrigerator’s control panel, if applicable.

Changing the water filter in a Kenmore refrigerator is a simple and straightforward process. All you need to do is locate the filter, remove the old filter, replace it with the new filter, and reset the filter indicator. Taking the time to change the water filter in your Kenmore refrigerator will ensure that you and your family are drinking clean, healthy water.