Calibrating the measured fill on a Sub Zero refrigerator is an important step in ensuring that the refrigerator is running optimally. It is important to calibrate the measured fill on a regular basis to ensure that the refrigerator is not overfilling or underfilling, which can cause problems with cooling and energy efficiency. This guide will provide an overview of the steps required to calibrate the measured fill on a Sub Zero refrigerator. It will cover the tools needed, the process of calibrating the fill, and tips on how to maintain the calibration.
How To Calibrate Measured Fill On Sub Zero Refrigerator
Calibrating the fill on a Sub Zero refrigerator is a relatively simple process that requires a few basic tools and a bit of patience. To begin, the user should locate the fill tube on the back of the refrigerator and disconnect it from the water line. Next, the user should place a measuring cup underneath the fill tube and collect the water that is discharged. After collecting the water, the user should measure the amount of water and compare it to the manufacturer’s recommended fill rate. If the fill rate is off, the user should adjust the fill valve by turning the adjustment screw in the appropriate direction. Lastly, the user should reconnect the fill tube and test the fill rate again to ensure that it is accurate. With these steps, the user can easily calibrate the fill rate on their Sub Zero refrigerator.
How To Calibrate Measured Fill On Sub Zero Refrigerator
1. Unplug the refrigerator from the power outlet.
2. Locate the calibration screw on the back of the refrigerator.
3. Turn the calibration screw clockwise until it stops.
4. Plug the refrigerator back into the power outlet.
5. Open the refrigerator door and press the “TEST” button.
6. Observe the fill indicator light. If it is lit, the calibration is complete.
7. If the indicator light is not lit, turn the calibration screw counter-clockwise until the light is lit.
8. Once the light is lit, the calibration is complete.
Calibrating the measured fill on a Sub Zero refrigerator is a relatively simple process that requires a few basic tools. By following the manufacturer’s instructions and using a thermometer to measure the temperature of the water in the reservoir, you can easily calibrate the measured fill to ensure that your refrigerator is running efficiently and correctly. With regular maintenance and calibration, you can ensure that your Sub Zero refrigerator will continue to provide you with years of reliable performance.