Calibrating a Samsung washer is a simple process that can help ensure your washer is running efficiently and effectively. Calibrating your washer involves adjusting the settings to ensure that the washer is using the correct amount of water and detergent for each cycle. This process is important to ensure that your washer is running at its optimal performance level. Here is a step-by-step guide on how to calibrate a Samsung washer.
How To Calibrate A Samsung Washer
1. Unplug the washer from the wall outlet and turn off the water supply.
2. Remove the front panel of the washer and locate the calibration screws.
3. Turn the calibration screws in a clockwise direction to increase the water level and in a counterclockwise direction to decrease the water level.
4. Plug the washer back into the wall outlet and turn on the water supply.
5. Select a cycle and start the washer.
6. Monitor the water level during the cycle. If it is too low or too high, adjust the calibration screws accordingly.
7. When the desired water level is achieved, turn off the washer and unplug it from the wall outlet.
8. Replace the front panel of the washer.
Calibrating a Samsung washer is a simple process that can be done in a few steps. First, open the washer lid and press the Power button to turn it on. Next, press and hold the Rinse/Spin and Power buttons for 3 seconds. Then, press the Start/Pause button and wait for the calibration to finish. Once the calibration is complete, the washer will be ready to use. Following these steps will ensure that your Samsung washer is calibrated correctly and running optimally.