If your Whirlpool washer won’t start because the lid switch is broken, you can bypass the lid switch to get the washer running again. Bypassing the lid switch is a simple process that requires a few tools and a few minutes of your time. With the right tools and a bit of patience, you can get your Whirlpool washer up and running in no time. Here’s how to bypass the lid switch on a Whirlpool washer.
Popular: How To Add Fabric Softener To Whirlpool Washer Without Agitator
How To Bypass Lid Switch On Whirlpool Washer
Unfortunately, it is not possible to bypass the lid switch on a Whirlpool washer. The lid switch is an important safety feature that prevents the washer from operating when the lid is open.
Favorite: How To Calibrate Whirlpool Washer
How To Bypass Lid Switch On Whirlpool Washer
1. Unplug the washer from the power source.
2. Locate the lid switch. It is usually located on the side of the washer near the top.
3. Remove the screws that hold the lid switch in place.
4. Disconnect the wires from the lid switch.
5. Connect the two wires together. This will bypass the lid switch.
6. Reassemble the lid switch and screws.
7. Plug the washer back in and test it.
Recommended: How To Add Fabric Softener To Whirlpool Washer Without Dispenser
How To Bypass 4 Wire Lid Switch On Whirlpool Washer
In conclusion, bypassing the lid switch on a Whirlpool washer can be done in a few different ways. The most common way is to use a jumper wire to bridge the two terminals on the lid switch. This will allow the washer to start even when the lid is open. Another option is to bypass the lid switch altogether by connecting the two wires together. This will allow the washer to run without the lid switch being engaged. While these methods can be effective, it is important to remember that bypassing the lid switch can be dangerous and should only be done by a qualified professional. After you follow the steps above, you should know how to bypass 4 wire lid switch on whirlpool washer.