If you have a Whirlpool washer with a lid lock switch, you may have experienced difficulty in opening the lid. This is because the lid lock switch is designed to prevent the lid from being opened while the washer is in use. Fortunately, there is a simple way to bypass the lid lock switch and open the lid. Here is a step-by-step guide on how to do it:
1. Unplug the washer from the electrical outlet.
2. Locate the lid lock switch, which is usually located on the top of the washer near the lid.
3. Use a flathead screwdriver to carefully pry the lid lock switch away from the washer.
4. Take a pair of needle-nose pliers and carefully remove the two wires connected to the lid lock switch.
5. Plug the washer back into the electrical outlet.
6. The lid should now be unlocked
How To Bypass Lid Lock Switch On Whirlpool Washer
The lid lock switch on a Whirlpool washer can be bypassed in order to allow the washer to run without the lid being closed. This can be done by first unplugging the washer from the power source. Then, locate the lid switch on the washer and remove the two wires connected to it. Next, use a pair of needle-nose pliers to twist the two wires together. Finally, plug the washer back in and the lid lock switch will be bypassed, allowing the washer to run without the lid being closed.
How To Bypass Lid Lock Switch On Whirlpool Washer
1. Unplug the washer from the wall outlet.
2. Remove the back panel of the washer.
3. Locate the lid lock switch.
4. Disconnect the two wires connected to the lid lock switch.
5. Reconnect the wires to the bypass switch.
6. Replace the back panel of the washer.
7. Plug the washer back into the wall outlet.
8. Test the washer to ensure that the lid lock switch is bypassed.
The best way to bypass the lid lock switch on a Whirlpool washer is to unplug the washer from the wall outlet and remove the top panel. Inside the control panel, you can locate the lid switch and disconnect it from the wiring. This will allow the washer to operate without the lid lock switch, but it is important to remember that the washer will not be able to detect when the lid is open and will not stop the cycle. Therefore, it is important to always keep the lid closed when the washer is in use.