If you have a Maytag washer and the lid lock switch is not working, it can be a frustrating experience. Fortunately, there is a way to bypass the lid lock switch on a Maytag washer. Bypassing the lid lock switch will allow you to open the lid and access the washer’s interior. Here is how to bypass the lid lock switch on a Maytag washer:
1. Unplug the washer from the wall outlet.
2. Open the washer lid.
3. Locate the lid lock switch. It is usually located on the inside of the washer lid.
4. Disconnect the wires from the lid lock switch.
5. Connect the two wires together. This will bypass the lid lock switch and allow you to open the washer lid.
6. Plug the washer back into the wall outlet.
Suggested: How To Unlock Maytag Top Load Washer
How To Bypass Lid Lock Switch On Maytag Washer
If you have a Maytag washer with a lid lock switch, you may be able to bypass the switch in order to open the lid. To do this, you will need to locate the lid lock switch on the washer. This is usually located on the top of the washer near the lid. Once you have located the switch, you can use a flathead screwdriver to press down on the switch and bypass the lid lock. This should allow you to open the lid and access the inside of the washer. Be sure to use caution when bypassing the lid lock switch, as it can cause damage to the washer if done incorrectly.
Recommended: How To Clean Maytag Washer Detergent Dispenser
How To Bypass Lid Lock Switch On Maytag Washer
1. Unplug the washer from the power source.
2. Locate the lid lock switch on the washer.
3. Use a flathead screwdriver to gently pry off the lid lock switch.
4. Once the switch is removed, locate the two wires connected to the switch.
5. Cut the wires and strip the ends of the wires.
6. Connect the two wires together with a wire nut.
7. Plug the washer back into the power source.
8. Test the washer to make sure the lid lock switch is bypassed.
Favorite: How To Unlock Lid On Maytag Washer
The best way to bypass the lid lock switch on a Maytag washer is to locate the lid lock switch and then remove the wires connected to it. Once the wires are disconnected, the lid lock switch will no longer be in use and the washer can be used without the lid lock switch. However, it is important to remember that the lid lock switch is a safety feature and should not be bypassed unless absolutely necessary.