If you own an LG WM3700HVA washer and find that the lid lock switch is preventing you from starting a cycle, you may be wondering how to bypass this feature. The lid lock switch is designed to prevent the washer from starting when the lid is open, as a safety measure. However, there are times when you may need to bypass this switch, such as if it is malfunctioning or if you need to access the washer while it is running.
Fortunately, bypassing the lid lock switch on the LG WM3700HVA washer is relatively simple. In this guide, we will walk you through the steps to successfully bypass the lid lock switch and start your washer even with the lid open. Please keep in mind that this bypass is not recommended for safety reasons, and it should only be done as a temporary solution until the lid lock switch can be properly repaired or replaced. Let’s get started.
How To Bypass Lid Lock Switch On Lg Wm3700Hva Washer
If you are having issues with the lid lock switch on your LG WM3700HVA washer and need to bypass it for a temporary solution, there are a few steps you can take.
First, you will need to unplug the washer from the power source to ensure your safety. Then, you will need to access the lid lock switch, which is typically located near the front of the machine.
Next, you will need to remove the lid lock switch from its mounting position and either disconnect the wires or bypass the switch itself. This may involve using wire connectors or electrical tape to connect the wires together.
Once you have successfully bypassed the lid lock switch, you can plug the washer back in and test to see if it is functioning properly. Keep in mind that bypassing the lid lock switch is only a temporary solution and it is recommended to replace the switch as soon as possible to ensure the safety and proper functioning of your washer.
How To Bypass Lid Lock Switch On Lg Wm3700Hva Washer
1. Unplug the washer from the power outlet to ensure safety.
2. Locate the lid lock switch on the washer. This switch is usually situated under the lid of the washer and is activated when the lid is closed.
3. Remove the screws that hold the lid lock switch in place using a screwdriver. Once the screws are removed, you can access the wiring connected to the switch.
4. Disconnect the wiring from the lid lock switch. This will prevent the switch from sending a signal to the washer when the lid is closed.
5. Connect the wiring together using wire nuts or electrical tape. This will create a continuous circuit and bypass the lid lock switch.
6. Screw the lid lock switch back into place on the washer and ensure it is secure.
7. Plug the washer back into the power outlet and test the machine to see if the lid lock switch has been successfully bypassed. Close the lid and try starting a wash cycle to confirm that the switch is no longer preventing the washer from working.
8. If the washer operates normally without the lid lock switch, you have successfully bypassed it. If you encounter any issues, double-check the wiring connections and ensure everything is secure before trying again.
In conclusion, bypassing the lid lock switch on the LG WM3700HVA washer can be done by following a few simple steps. By accessing the internal wiring of the washer, you can locate the lid lock switch and remove it from the circuit. However, it is important to proceed with caution and be aware of the potential safety hazards associated with bypassing the lid lock switch. It is always recommended to consult with a professional technician before attempting any modifications to your appliance.