If you have a Kenmore 110.2235251 washer and find that the lid lock switch is causing problems, you may be looking for a way to bypass it. The lid lock switch is a safety feature that prevents the washer from running when the lid is open. However, if the switch is faulty or causing other issues, you may need to bypass it to continue using your washer. In this guide, we will walk you through the steps to bypass the lid lock switch on your Kenmore washer.
How To Bypass Lid Lock Switch On Kenmore 110.2235251 Washer
If you need to bypass the lid lock switch on your Kenmore 110.2235251 washer, you can do so by following these steps:
1. First, unplug the washer from the power source to ensure your safety.
2. Locate the lid lock switch, which is usually located near the lid of the washer.
3. Take off the top of the washer by removing the screws around the edges.
4. Find the wires connected to the lid lock switch and disconnect them from the switch.
5. Connect the two wires together using a wire connector or electrical tape.
6. Reassemble the top of the washer and plug it back in.
7. Test the washer to make sure that the lid lock switch has been successfully bypassed.
Keep in mind that bypassing the lid lock switch may void your warranty and it may be unsafe to operate the washer without the lid lock function. Use this workaround at your own risk.
How To Bypass Lid Lock Switch On Kenmore 110.2235251 Washer
Bypassing the lid lock switch on a Kenmore 110.2235251 washer should only be done if you are skilled with electrical work and fully understand the risks involved. However, if you still wish to proceed, here are the steps to bypass the lid lock switch:
1. Unplug the washer from the power source to ensure your safety.
2. Locate the lid lock switch on the top of the washer. It is usually located near the door latch.
3. Disconnect the wires connected to the lid lock switch. You may need to use a screwdriver to remove the panel covering the wiring.
4. Connect the two wires together to bypass the lid lock switch. You can use wire connectors or electrical tape to secure the connection.
5. Once the wires are securely connected, plug the washer back in and test if the lid lock switch has been bypassed successfully.
6. Close the washer’s lid and start a washing cycle to see if the washer operates without the lid lock switch.
Remember that bypassing the lid lock switch on your washer can be dangerous and may void your warranty. It is always best to consult with a professional technician or contact the manufacturer for assistance with any issues related to the lid lock switch.
In conclusion, bypassing the lid lock switch on a Kenmore 110.2235251 washer can be a temporary solution to keep your washer running if the switch is faulty. However, it is important to remember that the lid lock switch is a safety feature designed to prevent accidents and injuries during the wash cycle. It is always best to replace a faulty lid lock switch with a new one rather than bypassing it. If you choose to bypass the switch, be sure to do so with caution and be aware of the potential risks. Always prioritize safety when working with appliances and consider consulting a professional for assistance if needed.