If you have a Haier washer with a lid lock switch, you may need to bypass it in order to open the lid. This is a relatively simple process that only requires a few tools and a few minutes of your time. Here is a step-by-step guide on how to bypass the lid lock switch on a Haier washer.
1. Unplug the washer from the wall outlet.
2. Locate the lid lock switch on the washer. It is usually located on the control panel, near the lid.
3. Remove the screws that hold the lid lock switch in place.
4. Disconnect the wires from the lid lock switch.
5. Connect the wires to a jumper wire.
6. Plug the washer back into the wall outlet.
7. Test the washer to make sure it is working properly.
How To Bypass Lid Lock Switch On Haier Washer
The lid lock switch on a Haier washer can be bypassed by accessing the back panel and disconnecting the lid lock wires. This will allow the washer to operate without the lid lock being engaged. It is important to note that bypassing the lid lock switch will void the warranty and may cause damage to the washer. It is recommended that a qualified technician be consulted before attempting to bypass the lid lock switch.
How To Bypass Lid Lock Switch On Haier Washer
1. Unplug the washer from the wall outlet.
2. Remove the top panel of the washer.
3. Locate the lid lock switch. It is usually located near the top of the washer.
4. Disconnect the wires connected to the lid lock switch.
5. Reconnect the wires to the lid lock switch in the opposite order.
6. Replace the top panel of the washer.
7. Plug the washer back into the wall outlet.
8. Turn the washer on and test the lid lock switch.
The best way to bypass the lid lock switch on a Haier washer is to disconnect the power cord from the wall outlet. This will prevent the lid lock switch from engaging, allowing you to open the lid and access the washer’s interior. However, it is important to note that this is only a temporary solution and should not be used as a permanent fix. If the lid lock switch is malfunctioning, it is best to have it replaced by a qualified technician.