If you have a Bosch washer that has a lid lock switch, you may be wondering how to bypass it. Bypassing the lid lock switch on a Bosch washer is actually quite simple and can be done in a few easy steps. First, locate the lid lock switch on the washer. This is usually located on the top of the washer near the lid. Next, use a flat-head screwdriver to carefully pry up the lid lock switch. Once the switch is released, the lid should be able to open. Finally, you can use a piece of tape or a zip tie to keep the lid lock switch in the open position, allowing you to bypass the lid lock switch. With these simple steps, you can easily bypass the lid lock switch on your Bosch washer.
How To Bypass Lid Lock Switch On Bosch Washer
The lid lock switch on a Bosch washer can be bypassed by unplugging the washer from the wall, removing the top panel, and locating the lid lock switch on the control board. Once the lid lock switch is located, a flathead screwdriver can be used to bridge the two pins on the switch to complete the circuit. This will allow the washer to operate without the lid lock switch. It is important to note that bypassing the lid lock switch can be dangerous and should only be done by a qualified technician.
How To Bypass Lid Lock Switch On Bosch Washer
1. Unplug the washer from the power source.
2. Remove the top panel of the washer.
3. Locate the lid lock switch.
4. Disconnect the wires from the lid lock switch.
5. Connect the wires together with a wire nut.
6. Reattach the top panel of the washer.
7. Plug the washer back into the power source.
8. Test the washer to make sure it works properly.
The best way to bypass the lid lock switch on a Bosch washer is to unplug the washer from the power source and remove the lid lock switch. Then, use a flathead screwdriver to open the lid lock switch and remove the wires. Finally, reattach the wires to the switch and plug the washer back in. This should allow the washer to operate as normal without the lid lock switch in place.