If you are having problems with your Maytag washer not completing its cleaning cycle, you may need to bypass the cycle to get your laundry done. This guide will walk you through the steps of bypassing the cleaning cycle on a Maytag washer. Before starting, make sure to unplug the washer and disconnect the power source.
First, you will need to locate the control panel on the front of the washer. Once you have found the control panel, press and hold the “Start/Pause” button for 3 seconds. This will unlock the control panel.
Next, press the “Cycle Select” button until the desired cycle is displayed on the screen. Once you have chosen the cycle, press the “Start/Pause” button again to start the washer. Finally, press the “Options” button and select the “Bypass Cleaning Cycle” option.
Popular: How To Clean Maytag Top Load Washer Filter
How To Bypass Cleaning Cycle On Maytag Washer
Unfortunately, it is not possible to bypass the cleaning cycle on a Maytag washer. The cleaning cycle is an important part of the washing process and is designed to help keep your washer clean and running efficiently.
How To Bypass Cleaning Cycle On Maytag Washer
1. Unplug the washer from the power source.
2. Press and hold the “Start/Pause” button for 3 seconds.
3. Press the “Cancel/Drain” button.
4. Press the “Start/Pause” button again to bypass the cleaning cycle.
5. Plug the washer back into the power source.
How To Reset Maytag Top Load Washer To Factory Settings – Solution
The best way to bypass the cleaning cycle on a Maytag washer is to use the diagnostic mode. This mode allows you to manually select the cycle you want to use without having to go through the cleaning cycle. The diagnostic mode is accessible by pressing and holding the “Extra Rinse” and “Signal” buttons simultaneously for three seconds. Once you have accessed the diagnostic mode, you can select the cycle you want to use and bypass the cleaning cycle.