If you have a Whirlpool French Door Refrigerator, you may need to adjust the doors to ensure they are properly aligned. This guide will provide you with the steps to adjust the doors and ensure they are properly aligned.
First, you will need to locate the door adjustment screws. These are typically located at the top of the refrigerator doors. Depending on your model, you may need a Phillips or flathead screwdriver to adjust the screws.
Next, you will need to adjust the screws to adjust the doors. If the doors are not aligned properly, you can adjust the screws to move the doors in the desired direction. If the doors are too close together, you can turn the screws counterclockwise to move the doors apart. If the doors are too far apart, you can turn the screws clockwise to move the doors closer together.
How To Adjust Doors On Whirlpool French Door Refrigerator
1. Open the doors and check the alignment. If the doors are not aligned properly, you may need to adjust the hinges.
2. Locate the adjustment screws on the hinges. These screws are usually located at the top and bottom of the hinge.
3. Loosen the adjustment screws slightly.
4. Gently push or pull the door until it is aligned properly.
5. Tighten the adjustment screws to secure the door in place.
6. Repeat the process for the other door.
7. Test the doors to make sure they open and close smoothly.
How To Adjust Doors On Whirlpool French Door Refrigerator
In conclusion, adjusting the doors on a Whirlpool French door refrigerator is a relatively simple process. All that is needed is a Phillips head screwdriver and a few minutes of your time. Start by loosening the two screws on the top hinge, then adjust the bottom hinge until the doors are level. Finally, re-tighten the screws and check the alignment of the doors. With these steps, you can easily adjust the doors on your Whirlpool French door refrigerator.