If you have a Whirlpool refrigerator, you may find that the door needs to be adjusted from time to time. Adjusting the door can help ensure that it seals properly and keeps your food cold. This guide will walk you through the steps of how to adjust a Whirlpool refrigerator door.
First, you will need to locate the two screws on the top of the door. These screws are used to adjust the height of the door. Once you have located the screws, you will need to turn them clockwise to raise the door, or counterclockwise to lower the door.
Next, you will need to adjust the side-to-side alignment of the door. This can be done by loosening the screws located on the bottom of the door. Once the screws are loose, you can move the door left or right as needed.
How To Adjust A Whirlpool Refrigerator Door
1. Unplug the refrigerator from the wall outlet.
2. Locate the screws that hold the door hinges in place.
3. Loosen the screws with a screwdriver.
4. Open the door and hold it in place with one hand.
5. With your other hand, adjust the top hinge up or down to change the door’s height.
6. Tighten the screws to secure the door in place.
7. Close the door and plug the refrigerator back in.
How To Adjust A Whirlpool Refrigerator Door
Adjusting a Whirlpool refrigerator door is a simple process that doesn’t require any special tools. The first step is to locate the adjustment screws on the top and bottom of the door. Once the screws are located, the door can be adjusted by loosening or tightening the screws. To adjust the door, the screws should be turned in the direction of the arrow on the screw head. This will move the door closer or further away from the refrigerator. After the adjustment is complete, the screws should be tightened to secure the door in place. With a few simple steps, a Whirlpool refrigerator door can be easily adjusted.