How To Access Drain Pump On Whirlpool Duet Washer – Guide

If you need to access the drain pump on your Whirlpool Duet washer, you will need to first unplug the washer from the wall outlet. Then, you will need to remove the bottom panel of the washer by unscrewing the screws that are located on the back of the washer. Once the bottom panel is removed, you will be able to access the drain pump. The drain pump is located on the bottom of the washer and is connected to the water inlet hose. You can then disconnect the hose from the pump and remove the pump from the washer.

 

Suggested: How To Drain A Whirlpool Duet Washer

 

How To Access Drain Pump On Whirlpool Duet Washer

To access the drain pump on a Whirlpool Duet washer, you will need to remove the front panel. To do this, open the door and locate the two screws at the bottom of the panel. Unscrew the screws and remove the panel. You will then be able to access the drain pump.

 

Recommended: How To Fix F5 E3 Error Code Whirlpool Washer

 

How To Access Drain Pump On Whirlpool Duet Washer

1. Unplug the washer from the wall outlet.
2. Slide the washer away from the wall.
3. Remove the access panel on the back of the washer.
4. Locate the drain pump on the bottom right side of the washer.
5. Disconnect the drain hose from the drain pump.
6. Unscrew the two screws that secure the drain pump to the washer.
7. Pull the drain pump out of the washer.
8. Inspect the drain pump for any debris or clogs.
9. Clean the drain pump if necessary.
10. Reinstall the drain pump and reattach the drain hose.
11. Replace the access panel and slide the washer back into place.
12. Plug the washer back into the wall outlet.

In conclusion, accessing the drain pump on a Whirlpool Duet washer is a relatively simple process. First, unplug the washer and locate the access panel on the bottom of the washer. Remove the screws holding the access panel in place and lift the panel off. The drain pump will be visible and accessible. Carefully remove the drain pump and inspect it for any signs of damage. If necessary, replace the drain pump with a new one and reassemble the washer.