Replacing the seal at the bottom of a Kenmore washing machine is a relatively straightforward process that can be completed in a few simple steps. First, you will need to unplug the machine and turn off the water supply. Then, you will need to remove the screws that secure the bottom panel to the machine. Once the panel is removed, you will be able to access the seal. You will need to remove the old seal and replace it with a new one. Finally, you will need to reattach the bottom panel and secure it with the screws. With these steps, you should be able to successfully replace the seal at the bottom of your Kenmore washing machine.
How Do You Replace The Seal In The Bottom Of A Kenmore Washing Machine
Replacing the seal in the bottom of a Kenmore washing machine is a relatively simple process. First, the washing machine must be disconnected from the power source and the water supply. The machine must then be tilted on its side and the screws on the bottom panel must be removed. The old seal must then be removed and the new seal must be placed in the same position. The bottom panel must then be replaced and the screws must be tightened. Finally, the washing machine must be reconnected to the power source and the water supply.
How Do You Replace The Seal In The Bottom Of A Kenmore Washing Machine
1. Unplug the washing machine from the wall outlet and shut off the water supply.
2. Remove the front panel of the washing machine.
3. Remove the screws from the bottom of the washing machine to access the seal.
4. Carefully remove the old seal and clean the area around it.
5. Place the new seal in the same position as the old one.
6. Reinstall the screws to secure the seal.
7. Replace the front panel of the washing machine.
8. Plug the washing machine back in and turn on the water supply.
Replacing the seal in the bottom of a Kenmore washing machine is a relatively simple process that can be completed with a few common tools and a few minutes of time. After disconnecting the power and water supply, the old seal can be removed and the new seal can be installed with a few simple steps. Once the new seal is in place, the power and water supply can be reconnected and the washing machine can be tested to make sure the seal is properly installed. With the proper tools and a bit of patience, replacing the seal in the bottom of a Kenmore washing machine can be a straightforward and rewarding task.