If you are trying to put your Maytag upright freezer into tech test mode, you can do so by following the steps outlined below. First, make sure the freezer is plugged in and the power is turned on. Next, press and hold the “Power On/Off” button for at least five seconds. After five seconds, release the button and press and hold the “Freezer” button for five seconds. Release the button and then press and hold the “Power On/Off” button for five seconds. This will put the freezer into tech test mode. You can then use the “Freezer” and “Refrigerator” buttons to cycle through the different diagnostic tests. When you are finished, press and hold the “Power On/Off” button for five seconds to exit tech test mode and return to normal operation.
How Do I Put A Maytag Upright Freezer In Tech Test Mode
To put a Maytag upright freezer in tech test mode, press and hold the power on/off button for 5 seconds. The display will show “TEST” and the freezer will enter into test mode.
How Do I Put A Maytag Upright Freezer In Tech Test Mode
1. Unplug the freezer from the wall outlet.
2. Wait for two minutes.
3. Plug the freezer back into the wall outlet.
4. Press and hold the “Power Cool” and “Power Freeze” buttons simultaneously for five seconds.
5. The display will show “TECH TEST” and the freezer will enter into the tech test mode.
6. Press the “Power Cool” button to cycle through the various diagnostic tests.
7. Press the “Power Freeze” button to exit the tech test mode.
In conclusion, putting a Maytag upright freezer into tech test mode is a relatively straightforward process. First, you must unplug the freezer from the wall outlet and wait for at least five minutes. Then, press and hold the “Alarm” and “Power” buttons for five seconds. The freezer will then enter tech test mode, and the display will show “TEST” in the upper left corner. After the tech test mode is complete, you can press and hold the “Alarm” and “Power” buttons again to exit the tech test mode.