If you have a Maytag upright freezer and need to put it into diagnostic mode, you can do so by following a few simple steps. First, unplug the freezer from the wall outlet and wait for at least five minutes. Next, press and hold the “Power” button for five seconds. Then, press and hold the “Control Lock” button for five seconds. Finally, press and hold the “Alarm” button for five seconds. This will put the freezer into diagnostic mode, allowing you to access the diagnostic menu and troubleshoot any issues you may be having.
How Do I Put A Maytag Upright Freezer In Diagnostic Mode
Unfortunately, it is not possible to put a Maytag upright freezer into diagnostic mode. The only way to diagnose any issues with the freezer is to call a qualified technician.
How Do I Put A Maytag Upright Freezer In Diagnostic Mode
1. Unplug the freezer from the wall outlet.
2. Wait at least 10 minutes before plugging the freezer back into the wall outlet.
3. Press and hold the “Alarm Reset” and “Freezer” buttons simultaneously for 5 seconds.
4. The display will show “Diag” and the diagnostic mode will be activated.
5. Press the “Alarm Reset” button again to cycle through the diagnostic tests.
6. Press the “Freezer” button to select the desired test.
7. When the test is complete, press the “Alarm Reset” button to exit the diagnostic mode.
After following the steps outlined in this article, you should now be able to put your Maytag upright freezer into diagnostic mode. This mode will allow you to check for any errors or problems with the appliance, and make any necessary repairs or adjustments. With this information, you can ensure that your freezer is running properly and efficiently.